UL 1642 - Battery Safety Test Chamber

BELL  Group

Home
Product
Container Lab Solution
Battery Pack Cooler
New R&D Machines
Battery Cell Test Chambers
Battery Module Test Chambers
EV Battery Pack Test Chambers
Crush Nail Pentration Tester
Environmental Chambers
Customized Walk-in Chambers
Charge and Discharge Tester
Standards
Service
Replacement Parts
Aftersale Services
Software Update
Maintenance
Installation Services
Blog
Contact
About us
…
- Home
- Product
  Container Lab Solution
  Battery Pack Cooler
  New R&D Machines
  Battery Cell Test Chambers
  Battery Module Test Chambers
  EV Battery Pack Test Chambers
  Crush Nail Pentration Tester
  Environmental Chambers
  Customized Walk-in Chambers
  Charge and Discharge Tester
- Standards
- Service
  Replacement Parts
  Aftersale Services
  Software Update
  Maintenance
  Installation Services
- Blog
- Contact
- About us

BELL  Group

Home
Product
Container Lab Solution
Battery Pack Cooler
New R&D Machines
Battery Cell Test Chambers
Battery Module Test Chambers
EV Battery Pack Test Chambers
Crush Nail Pentration Tester
Environmental Chambers
Customized Walk-in Chambers
Charge and Discharge Tester
Standards
Service
Replacement Parts
Aftersale Services
Software Update
Maintenance
Installation Services
Blog
Contact
About us
…
- Home
- Product
  Container Lab Solution
  Battery Pack Cooler
  New R&D Machines
  Battery Cell Test Chambers
  Battery Module Test Chambers
  EV Battery Pack Test Chambers
  Crush Nail Pentration Tester
  Environmental Chambers
  Customized Walk-in Chambers
  Charge and Discharge Tester
- Standards
- Service
  Replacement Parts
  Aftersale Services
  Software Update
  Maintenance
  Installation Services
- Blog
- Contact
- About us

Battery Projectile / Burning Tester

This machine applied for battery burning resistance testing. Testing according to standard UL1642 and UL2054. -Model: BE-8105 -Structure: All-in-one structure, the door uses explosion-proof lock and explosion-proof chain -Burner: Bunsen burner with inner diameter of 0.375 inch (9.5mm) and length approx. 100mm -gnition Device: Automatic ignition -Display Mode: PLC touch + Remote control -Observation window: 390360mm (20mm thick explosion-proof glass, install explosion-proof stainless steel mesh) -Overall Dimension: W940D780*H1620 mm -Power Source: AC 220V 50HZ 2.0KW

Battery Impact Tester

To test battery safety performance through different hammer and different stress areas from different height. The battery verifies as qualified on the condition of no flames or explosion after this heave impact test. Test specimens is placed on a plane. A bar with its diameter at 15.8mm placed on the central position of test specimens in cross direction. A heavy of 9.1kg drop free from a height of 610mm down to the test specimens. Each test specimen has to bear the impact test and each test need different test specimens. -Model: BE-8106 -Drop Ball Weight: 9.1kg±0.1kg -Drop Height 0~770mm（Adjustable) -Control Mode PLC Touch Screen Control+ Remote Control -Crossing Bar Diameter: 15.8 mm -Effective Test Space: W300D300H300mm -Overall Dimension: W940D780H1620mm -Power Supply: AC 220V, 50Hz, 2.0KW

Forced Internal Short Circuit Tester

This battery forced internal short-circuit tester is an integral testing equipment to performance a comprehensive test for temperature, voltage, internal-short circuit, which is applicable for Lithium-ion battery cell safety test that complied with the Japan Industrial standard & relevant clause such as IEC 62133-2017. -Temperature Range: -10℃ ～ +80℃（Controllable） -Inner Dimension: W700H600D500 mm -External Dimension: W1000H1800D980mm -Force Range: 200~2000N -Force Accuracy: ≤±0.5％FS -Displacement Accuracy: ≤±0.5％FS -Speed Range: 1~200mm/min -Effective Range: 200mm (excluding holder) -Voltage Acquisition: 0—10V, resolution:1mv, frequency≤100Hz, 1 channel -Temperature Acquisition: 0~850℃, accuracy: ±2.0℃, frequency≤10Hz, 2 channels -Power Source: AC220V , 50HZ, 5KW

Battery Drop Tester

This machine applies for small consumer electronic products like mobile phone, mobile batteries, interphone, electronic dictionary ,CD/MD/MP3 etc. and components free dropping testing. -Drop Height 300～1500mm(Controllable) -Display accuracy 0.1mm -Height deviation ±5mm -Test Loading: ≤5kg -Test Space: W200D200H200mm -Drop floor material: Steel plate (marble plate, wooden plate each 1 piece ) -Machine Dimension: W940D940H1900mm -Power Source 220V, 50Hz, 1KW

Thermal Abuse Test Chamber

Mainly applied for industrial products drying, thermal treatment etc. -Temperature Range: Ambient temperature+10～150℃ (controllable) -Control Accuracy: ±0.5℃ -Distribute Temp. ±2.0℃ (non-load) -Temperature rising rate: 5℃ ± 2℃/ minutes (linear settable) -Control Method: PLC Touch Screen Control -Working Room Dimension: W600D500H780mm -External Dimension: W940D1250H1620mm -Power Source: 220V 50HZ,single phase, 5KW

Temperature Cycling Test Chamber

This test assesses cell and battery seal integrity and internal electrical connections. The test is conducted using rapid and extreme temperature changes. -Model: BTKS5-Series -Temp. Range: -40℃~+150℃ (adjustable) -Temp. Fluctuation: ≤±0.5℃ -Temp. Deviation: ≤±2.0℃ -Temp. Uniformity: ≤2.0℃ -Temp. Heating Time: From -40℃ to +85 ℃, average 5℃/ min. No load, non-linear; -Temp. Cooling Time: From +85℃to -40℃, average 5℃/ min. No load, non-linear; -Cooling Method: Air cooling -Power Source: AC380V, 50Hz, three phase

Computer Control Battery Crush And Nail Penetration Tester

This Battery Crush Test Machine is designed to simulate actual using environments for the lithium battery such as battery in crush and feedback the various results in different crushing conditions. -Force Range: 2-20KN/5-50KN -Crush Speed: 0.01~15mm/s (Adjustable) -Driving Method: Electric Servo Drive -Crush Range: 300mm -Crush Accuracy: ±0.5% -Nail Penetration Speed: 1~40mm/s -Controlling Mode: Computer control -Effective Test Space: W300D300H300mm (Can be customized as required) -Overall Dimension: W1250D1150H1860mm -Observation Window: 300*300mm explosion-proof glass with explosion-proof membrane -Power Supply: AC 220V 50HZ

Temperature Control Short-Circuit Tester

Remote integral battery large current short-circuit test machine is designed to complies with standards at the internal resistance far less than 100mΩ to achieve large short-circuit current. In additional, a load-bearing capacity must be designed in electrical system for short-circuit system. Thus, BELL R&D team selects industrial DC magnetic contact with full copper terminal and internal copper current conduction and internal active bead axial fan is mounted to cool to ensure the test system safer and reduce the test machine power consumption and enable the test data in accuracy. -Model: BE-8102 -Max. short-circuit current: 400A or 1000A -Internal Resistance: 80±20 mΩ -Controlling Mode: PLC touch type (7 inch) + remote control -Temperature Range: Normal temperature to 80°C or 0-80°C (Optional) -Inner Dimension: W600D500H600mm -External Dimension: W940D780H1620mm

Altitude Simulation Test Chamber

Battery low pressure (high attitude) simulation test, all the testing specimen are being tested under 11.6kPa (1.68psi) . To judge the test result on condition of no explosion, flame, smoke, electric leakage after test. And the battery protection valve should not be broken. -Model: BE-8104 -Temperature Range: Room temperature -Display Mode: Touch screen + remote control -Internal Dimension: W600D600H600 mm -External Dimension: W940D780H1620 mm -Air Pressure: Normal pressure ~5Kpa (Adjustable) -Power Supply: AC 220V, 50Hz, 1KW

Battery Crush And Nail Penetration Tester

This battery test machine is designed to simulate the power lithium battery terminal actual using environments, such as battery in crush, penetration and feedback the various results in different crushing condition. -Model BE-8111 -Max. Force: 2-20KN (Can be customized according to requirements) -Driving Mode: Hydraulic -Crush Range: 300mm -Crush Accuracy: ±1% -Nail Penetration Speed: 1~40mm/s -Controlling Mode: PLC touch screen control system (7-inch touch screen) + remote control -Testing Space: W500D300H300mm (Can be customized) -Overall Dimension: W940D780H1620mm -Observation Window: 390*360mm (20mm thick tempered glass with explosion-proof grid) -Power Supply: AC 380V, 50HZ, 2.0KW

Battery Pack Sea Water Immersion Test Device

Walk-in Altitude Simulation Test Chamber

Battery Pack Drop Test Device

Walk in Explosion-Proof Test Chamber

Thermal Runaway Test Machine

Battery Pack Rotate Test Device

Complex Salt Spray Test Chamber

Walk-in Temperature Cycling Test Chamber

-Temperature Range: -40ºC ~ +150ºC (Adjustable) -Temperature Fluctuation: ±0.5ºC -Temperature Deviation: 2.0ºC -Heating Rate: Average 5ºC/min (From -40ºC up to +80ºC, non-linear, no load) -Cooling Rate: Average 5ºC/min (From +80ºC up to -40ºC, non-linear, no load) -External Material: SPCC -Internal Material: 1.2 mm thickness SUS# 304 heat and cold resistant stainless steel with seal welding. -Controller: LCD touch screen. -Compressor Semi-Hermetic Compressors: BOCK / BITZER (Germany) -Cooling Type: Air cooling or water cooling (Optional)

Battery Pack Horizontal Crush Nail Penetration Tester

External Fire Exposure Test Machine

-Test Space: W1500D2500H800mm or W2000D3000H1000mm -Equipment Dimension: W7500D3700H960mm or W8500D4200H960mm -Movable Rack W1500D3000mm or W2200D3200mm -Max. Load: 1000KG (2000KG,3000KG can be customized) -Object Holder Moving Speed: 6000mm/min (Adjustable) -Refractory Rack Moving Speed: 6000mm/min (Adjustable) -Control System: PLC touch screen close control + computer remote control -Ignition Mode: Automatic high pressure pack ignition

Show more